Lonsdor KH100 Key programmer Functions introduction

Lonsdor KH100 has many functionalities including Identify Copy/ Coil, Access Control Key, Simulate/ Generate Chip, Generate Remote/ Smart key(card), Remote Frequency, etc. In details… 4.1 1. Identify Copy Enter this menu, follow the system prompts to operate (as shown). 4.2 2. Access Control Key Enter this menu, follow the system prompts to operate (as shown). 4.3 3. Simulate Chip Put KH100’s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate. This device supports below chip types: ①4D ②46 ③48 4.4 4. Generate Chip Put below types of the chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts. This device supports below chip types: ①4D ②46 ③48 ④T5 ⑤7935 ⑥8A ⑦4C ⑧Other Note: some chip data will be covered and locked. 4.5 5. Generate Remote Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions. 4.6 6. Generate Smart key(card) Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card(as shown) according to different regions 4.7 7. Identify Coil 1) Search smart induction area Connect remote key with remote connector, Put KH100’s antenna close to the predetermined position. If the inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below). 4.8 2) Detect IMMO Connect remote key with remote connector, Put KH100’s antenna close to key identification coil, and use the key to turn ignition ON. When KH100 buzzer beeps, it means the signal is detected. 4.9 8. Remote Frequency Enter this menu, put remote control at the device’s induction area to detect remote frequency 4.10 9. Special function Include: detect infrared signal, unlock Toyota smart key, More functions, to be continued… 1) Detect infrared signal Put remote control at the infrared signal detection area, press the remote’s button once. When the light on KH100’s screen is on, it indicates there is an infrared signal, otherwise there is no signal (see below pic). 4.11 2) Unlock Toyota smart key Put in smart key, click OK to operate. 4.12 More detailed info please refer to the user manual: https://www.autonumen.com/goods-6940-Lonsdor-KH100-Remote-Maker-Key-Programmer-Update-Online.html