|
up vote
0
down vote
favorite
|
|
||
|
|
Can you answer these questions?
|
Can I use a 5V 3A power supply (AC/DC adapter) instead of a 5V 2A power supply? |
|
|
Can I take both Claritin and Alka-Seltzer Plus? |
|
|
can I sue former attorney? |
Your Answer
Related Content
 |
Metal-halide lamp
As a result, metal-halide lamps have high luminous efficiency of around 75 - 100 ... 150 watt metal-halide bulb in fixture, about halfway through warmup ... The outer bulb can also be used to block ... |
|
Compact fluorescent - Clark Public Utilities
A 13-watt bulb uses a different ballast than a 19-watt bulb. ... efficient than incandescent bulbs, the wattage will be lower than you are accustomed to looking for ... Lower color temperature bulbs give off a reddish-orange light while higher color ... |
|
Simply Hydroponics - Article 6-6
High-Intensity Discharge (HID) lighting has formed the core of lighting ... This is no surprise as HID lights offer the most lumens per watt in practical lighting systems. ... have a long arc tube that operates at a relatively low pressure approximately ... Without the ballast, the HID bulb could not ignite - and if it were to ignite, ... |
Related Questions
|
What do you usually do in your house/flat/room? |
|
|
How do I thread my Domestic 762 sewing machine? |
|
|
How can I get rid of a raccoon living in my shed? |
Related Content
|
Overdriving Fluorescent Lights - OoCities
You can do a 1x, 2x, or 3x overdrive with a four-lamp ballast, but the efficiency drops. ... Don't even think about using a magnetic ballast, it won't work for overdriving fluorescent ... .. starter device and are only found in Magnetic ballasts, usually the lower-wattage ones. ... . But the overall luminosity will still be slight... |
|
Overdriving UV lamps | FMS - The Fluorescent Mineral Society
I have put 15 watt MW tubes into a lamp with 25 watt ballasts. ... Does overdriving a lamp really cause a significant loss in lamp life. ... Moderm switching ballasts do it at high frequency using a smaller inductor and capacitive coupling. ... might get slightly more output from a 20W tube using a 25W ballast, but ... |
|
Light Bulb, Lighting Fixture and Lamp Troubleshooting
a) Many of these fixtures are rated to use bulbs no more than 60 watts. ... Use a triac or SCR with slightly higher trigger current requirement at your own risk, ... . This blinking is hard on the starter, and the ballast can get stressed if the starter gets ... . 4-foot T8 (1-inch diameter) 32 Watt Low Mercury Lamps are Getting Dim:. |
|
Keep Current: Estimating Savings from Upgrading T12 Lights
It sounds odd to have a 32-watt-rated lamp only use 25 to 28 watts, but this ... with lamps that are driven by a high-efficiency electronic ballast with a low ballast factor. ... lumens per lamp, albeit at a slightly lower lumens per watt (LPW) efficiency ... The savings from the 96" T8 lights will be due to the improved ballast f... |
|
Indoor Aquaponics Grow Lights | The Aquaponic Source
An HID lighting system consists of a ballast, reflector, socket and lamp (light bulb) . ... Lower wattage CFL grow lights, such as 26 and 32 watt, can be used with ... Inda-Gro Induction lamps are a type of High Output Fluorescent lamp that is ... |